Original DISCOFILM 500 ml – Professional Record & Media Cleaner
✅ Made in Germany – Hand-bottled with utmost care
✅ Universally applicable : For vinyl records , CDs , DVDs , Blu-rays & DSLR sensors
✅ Residue-free deep cleaning – without scratches, without mechanical stressWhy DISCOFILM?
DISCOFILM has been the classic record cleaner for over 30 years. The innovative, honey-like liquid is applied generously, dries to an elastic film, and gently and effectively removes even stubborn dirt such as dust, fingerprints, cola or beer stains when peeled off.
Application – It's that easy!
- Pierce the bottle in the middle.
- Spread a generous amount of butter on the first side.
- Let it dry for 30 minutes
- Turn over, apply second side
- Allow to dry for 2–4 hours (depending on room temperature)
- Apply adhesive strips, peel off the film – done!
Ideal for
- Vinyl records (LPs, singles)
- CDs, DVDs, Blu-rays
- Sensors of SLR cameras
Scope of delivery
- 1x DISCOFILM bottle (500 ml)
- 1x can opener
Certified quality
The trade magazine Audio praised DISCOFILM after a rigorous test:
“Like new” – a tour de force by the Berlin inventor Maximilian Müller.
Conclusion
Whether after the party or for regular maintenance: DISCOFILM makes your records and optical media shine again – simply, effectively and safely .
DISCOFILM Record Cleaner 500 ml Refill Pack – incl. can opener
Using the DISCOFILM bottle with sponge applicator – step by step
1. Apply
- Pull the cap off the DISCOFILM bottle upwards.
- Carefully pierce the sealing membrane with a pointed object (e.g. a spike).
- First, press DISCOFILM directly onto the record in a wavy line .
- Then, spread the liquid evenly and generously using the sponge applicator or a brush.
- Make sure that a homogeneous, closed film forms over all grooves.
💡 Tip from Dr. DISCO:
Before use, briefly warm the DISCOFILM bottle in a water bath (approx. 25–30 °C ).
This makes the liquid more pliable – and you can clean more record sides with one filling .2. Drying & Peeling
- Allow the film to dry completely – depending on room temperature, this will take approximately 2–4 hours .
- During drying, DISCOFILM binds all dust and dirt particles deep within the groove.
Deduct:
- Attach a strip of adhesive tape approximately 5 cm long halfway to the edge of the board and press it firmly onto the dried film.
- Then slowly and evenly peel the film upwards – using the protruding adhesive strip.
❗ Note regarding film breaks
If the film tears when peeled off, it was probably applied too thinly .
No problem: Simply apply an additional layer of DISCOFILM over the already dried film and repeat the process.
